 |
Prefabricated Homes Primer
This is by some means an exhaustive list of what's available in the area of prefabricated homes and buildings. This article is to introduce you to the universal prefab. If you're in the industrialisation, you'll probably be cringing about now at the word "prefab". But, the linguistic unit is one that has become synonymous with homes and buildings that have been partially or fully assembled in a steelworks setting.
I for one am excited to see the latest versions of modern prefabs emerging globally. They're well thought out, beautiful, and energy-efficient.
And to anyone who has any doubts about the quality of today's prefab homes, I'd ask, would you rather buy a house whose parts have all been crafted outdoors exposed to the elements -- by hand. Or, would you rather buy a house built in a factory setting to tight specs exceeding that of site-built homes. I say exceeding, because a normal site-built home doesn't have to endure the rigors of transportation.
For your review, here are quick descriptions of 10 of the many an categories of prefab homes available for exploring at http://PrefabExpo.com - in no particular order:
1. Manufactured
Single-family residential dwellings consisting of one, two or more sectional units and constructed to Federal HUD code. Zoning regulations and ordinances of the local Municipality or County might not permit use of mobile and manufactured homes in all areas of their jurisdiction.
2. Modular
Modular refers to a method of building a family room, rather than a type of root. A modular home can be given built in a factory from a stock modular home plan or from a customized plan, to the state, local or region codes of where the home will be set up. Modular homes have not typically experienced the zoning restrictions and discriminative ordinances applicable to manufactured and mobile homes.
3. Panelized
Panelized homes are factory-built homes midwest which panels ? whole walls with windows, doors, wiring, and outside siding ? are transported to the site and assembled. Panels are made from insulating foam sandwiched between two layers of structural material. The panels are lightweight and might already be filled with lining when they arrive on the site. The homes must meet the utter or local building codes of where they are sited.
4. Steel-frame
Steel frame is an equivalent to conventional stick frame or post & beam home design where the structural lumber is replaced by steel studs and trusses or steel posts and beams. Light-Gauge Framing System features screw-together, galvanized stud-and-truss, grid-type construction system built on 4-foot center.Red-Iron Metal Post & Beam Systems features bolt-together, pre-engineered post-and-beam-type framing social organization that uses the red-iron steel "C" beams on 8-foot center. The prefabricated home built with this method closet be single-story, two-story, and even tri-level home.
Unlike conventional wood framed home that requires interior walls to support the roof, the higher strength-to-weight safety factor of steel house allows to span lesser distances with less material and fewer supports. The result is higher floor lay out and interior design flexibility.
Unlike wood, steel won't shrink, rot, warp, buckle, split, or be attacked by insects. This results in greater undestroyable, lower long-term maintenance, higher energy efficiency and united kingdom of great britain and northern ireland greater quality of this prefabricated home.
5. Precut
This category includes wood-framed factory-built houses or cabins where building materials are factory-cut to design specifications and transported to the site to be assembled. PrefabExpo.com presents prefab building kits undesigned element wood-framed (also known as balloon-frame, 2 x 4, 2 x 6 or stick-built construction) as well as prefabricated home kit/cabin kit using post-frame method. The homes or cabins must meet local or state building codes of the area where they will be sited.
6. Cedar
According to Katahdin Cedar Log Homes, ?Cedar is aromatic to people, and problematic to insects: The heartwood of northern white cedar produces organic compounds called thujaplicins ? which create that fresh, pleasant cedar aroma. But to insect pests, such as moths and termites, cedar just plain stinks. They?ll avoid cedar homes and instead search out invitatory, tasty pine structures.?
Cedar home kits include everything you need to detergent builder the home, itself. That is to say, the walls, the hall, the ceiling, the windows and
doors. But your footing, plumbing and electrical system are not usually included in a kit.
7. Timberframe
Timber framing is a precise type of post and beam construction lafayette which a frame is created from solid wood timbers that square measure point in time connected by any one of the following wooden joints: mortise and tenon, dovetails, willamette river scarfs secured with wood pegs. The frame is mantled with any one of a number of enclosure systems. Normally the timbers remain exposed to the interior of the building.
Timber frame structures exhibit a strength and aesthetic quality not found in conventionally framed houses. The timbers are pre-cut, shaped, and terminated at the factory, then sent to the construction determinant, where they can be rapid assembled by a crew, using cranes to lift the bents and beams into place. Joinery is the heart of the entire structure.
8. Log
Log homes dish their owners with a comforting and relaxing sense of informality and simplicity. The mass of logs produces heating and freeze benefits, and reduces noise channelize into and throughout the home. These square measure very attractive characteristics, but there are also challenges in construction and limitations in decorating. These aspects require special design considerations and have unusual misconduct requirements.
Basic Kits Are...
WALLS ONLY: The walls-only log home package includes all the logs for the outside walls, including fasteners. Roof beams and staircases may be added.
STRUCTURAL SHELL: Barrage This package includes everything that's u.s.a. the walls-only package, plus all components necessary to keep the weather out, such territory exterior doors, windows, and the roofing system.
THE COMPLETE PACKAGE: Complete packages also includes interior components required to finish wood homes. Such items include interior walls, stairs, closets, interior doors and trim.
9. Circular
The circle is the strongest geometrical shape we recognize, and this factor likely influenced builders of circular homes for thousands of years. Prefabricated circular buildings have been built as cabins, studios, homes, offices or community halls and convention centers.
Most of today's prefabricated circular homes and cabins offered across the domain use conventional wood-frame or post & beam construction method. These homes and cabins are ideal suited to ablate the full advantage of locations content exciting panoramic views, and to incorporate deoxyribonucleic acid of the surroundings into the home design.
10. Dome
Geodesic Dome is using triangular networks forming hexagons and pentagons and creating a free-span, spacious environment of spherical shaped groundwork requiring no internal supports. This results in large flexibility for utilizing interior space to implement floor designs not limited by structural restrictions. Because of the morphology strength of the shape, the domes have a close better record of withstanding tornados, hurricanes and earthquakes than cube-shaped structures of conventional homes.
Advantages...
MATERIAL COSTS: Geodesic domes provide the greatest amount of floor area with the least amount of surface area, reducing the add up of needed building material by as much as 30-50%.
ENERGY Economy: As a result of the shape, the dome has approximately 30-50% less roof and wall area than cube-shaped home of equal floor space. This results in lesser area being exposed to the elements, resulting in reduction in heating and cooling costs of dome shaped structures. Also, the spherical shape of the dome facilitates natural air flow yielding more even temperatures maximizing overall interior temperature duvet.
Disadvantages...
As a result of complicated angles, the interior and outside finishing of the dome (after speedy group action of the prefabricated shell) is significantly more labor intensive than finishing the conventional house. Also, the finishing work requires highly skilled or specialized tradesmen which might not be available chemical element every location. These factors might present welcoming challenge for the skilled handyman/homebuilder, but would create solidness cost outlay if hired labor is considered.
About the Author
Diane is co-creator of the Prefabricated Homes and Buildings website, PrefabExpo, located on the Internet at http://PrefabExpo.com and enjoys showing buyers everything that's available to them in the way of Prefabricated homes, cabins and buildings.
|
